Enums

enum mi::neuraylib::Bsdf_type

The BSDF type.

Enumerator:

BSDF_SCALAR = 0

One scalar per grid value.

BSDF_RGB = 1

Three scalars (RGB) per grid value.

BSDF_TYPES_FORCE_32_BIT = 0xffffffffU

enum mi::neuraylib::Decal_face_mode

This enum controls whether the decal is applied on the front face, back face, or both faces of the object. The front face of an object is the face whose angle between the implied face normal and the projector direction is larger than 90 degrees. The other face is the back face. If there is no projector then the front face is defined by the orientation of the object primitives.

Note that for materials that are not thin-walled the decal is never shown on the face with the higher density (in addition to the restrictions imposed by the value of this enum).

See also:

mi::neuraylib::IDecal::get_face_mode(), mi::neuraylib::IDecal::set_face_mode()

Enumerator:

DECAL_ON_FRONT_FACE

The decal is only applied on the front face of the object.

DECAL_ON_BACK_FACE

The decal is only applied on the back face of the object.

DECAL_ON_FRONT_AND_BACK_FACE

The decal is applied on the front and on the back face of the object.

DECAL_FACE_MODE_FORCE_32_BIT = 0xffffffffU

enum mi::neuraylib::Filter_type

Supported filter types. The filter type (or filter kernel) specifies how multiple samples are to be combined into a single pixel value.

See also:

mi::neuraylib::ITexture::get_flags()

mi::neuraylib::ITexture::set_flags()

Enumerator:

FILTER_BOX = 0

box filter

FILTER_TRIANGLE = 1

triangle filter

FILTER_GAUSS = 2

Gaussian filter.

FILTER_CMITCHELL = 3

clipped Mitchell filter

FILTER_CLANCZOS = 4

clipped Lanczos filter

FILTER_FAST = 5

a fast filter, could be GPU anti-aliasing, or any

FILTER_FORCE_32_BIT = 0xffffffffU

enum mi::neuraylib::Lightprofile_degree

Degree of hermite interpolation. Currently only linear (hermite 1) and cubic (hermite 3) degree are supported (see also [DH05]).

See also:

mi::neuraylib::ILightprofile::reset_file(), mi::neuraylib::ILightprofile::get_degree()

Enumerator:

LIGHTPROFILE_HERMITE_BASE_1 = 1

Degree 1 = linear interpolation.

LIGHTPROFILE_HERMITE_BASE_3 = 3

Degree 3 = cubic interpolation.

LIGHTPROFILE_DEGREE_FORCE_32_BIT = 0xffffffffU

enum mi::neuraylib::Lightprofile_flags

Ordering of horizontal angles in a light profile. The flags can be used to override the horizontal sample order in an IES file [IES02]. There are two IES file types in common use, type B and type C. The IES standard defines that samples are stored in counter-clockwise order. Type C files conform to this standard, but about 30% of the type B files deviate from the standard and store samples in clockwise order, without giving any indication in the IES file that could be used to switch the order. (Sometimes there is an informal comment.) Type A IES files are not supported.

See also:

mi::neuraylib::ILightprofile::reset_file(), mi::neuraylib::ILightprofile::get_flags()

Enumerator:

LIGHTPROFILE_CLOCKWISE = 1

Clockwise order, contrary to the IES standard for these (incorrect) type B files.

LIGHTPROFILE_COUNTER_CLOCKWISE = 2

Counter-clockwise, standard-conforming order (default).

LIGHTPROFILE_ROTATE_TYPE_B = 4

For 3dsmax.

LIGHTPROFILE_ROTATE_TYPE_C_90_270 = 8

For 3dsmax.

LIGHTPROFILE_FLAGS_FORCE_32_BIT = 0xffffffffU

enum mi::neuraylib::Texture_compression

Texture compression method.

Enumerator:

TEXTURE_NO_COMPRESSION = 0

no compression

TEXTURE_MEDIUM_COMPRESSION = 1

medium compression ratio

TEXTURE_HIGH_COMPRESSION = 2

high compression ratio

TEXTURE_COMPRESSION_FORCE_32_BIT = 0xffffffffU

enum mi::neuraylib::Texture_flag

Various texture flags. The values of these flags are powers of two. That is, the flags can be combined into a bitmask of flags, e.g., TEXTURE_DO_TRANSFORM | TEXTURE_DO_REPEAT.

Note that some flags cannot be set without setting others, too. For example, setting TEXTURE_ALT_X will set TEXTURE_TORUS_X as well. Likewise for TEXTURE_ALT_Y and TEXTURE_ALT_Z.

See also:

mi::neuraylib::ITexture::get_flags()

mi::neuraylib::ITexture::set_flags()

Enumerator:

TEXTURE_DO_TRANSFORM = 4

enable transform, not ident

TEXTURE_DO_REPEAT = 8

enable repetition

TEXTURE_DO_CROP = 16

enable cropping

TEXTURE_TORUS_X = 32

enable X torus

TEXTURE_TORUS_Y = 64

enable Y torus

TEXTURE_TORUS_Z = 128

enable Z torus

TEXTURE_ALT_X = 256

enable X flipping

TEXTURE_ALT_Y = 512

enable Y flipping

TEXTURE_ALT_Z = 1024

enable Z flipping

TEXTURE_FLAG_FORCE_32_BIT = 0xffffffffU